MESA is Mechanical Engineering Students Association which is coordinated by students voluntarily. Every semester MESA organizes many activities related to student’s development and welfare. Activities conducted this semester were as follows,
Mechanical Engineering department students celebrated Teachers Day
Every year 5th September is celebrated as Teachers' Day in the country. A day dedicated to teachers and their contributions to shaping one's life. On Tuesday, 05th September 2023 Mechanical Engineering Students Association (MESA) of the Mechanical Engineering department organized a Teachers Day Function to felicitate teachers. The function began with the worship of a photo of Dr. Sarvepalli Radhakrishnan. During the function, Prof. (Dr.) V. R. Naik Head of the department expressed his views about future opportunities, entrepreneurship, and challenges to be faced due to changing industrial needs. The faculties from the Mechanical department were present at this event. Students shared their love and affection towards teaching and non-teaching faculties from the department. The event was coordinated by student advisor Prof. (Dr.) B. B. Kabnure.
Mechanical Engineering department students celebrated Engineers Day
DKTE Mechanical Engineering Students Association (MESA) celebrated Engineer’s Day on 15th September 2023, in honor of Bharat Ratna Sir Mokshagundam Visvesvarayya as a tribute to one of the greatest engineers of the country for his outstanding contribution to society. The function began with the worship of a photo of Sir Mokshagundam Visvesvaraya. The faculties and students from the Mechanical department were present at this event. The event was coordinated by student advisor Prof. (Dr.) B. B. Kabnure under the guidance of Prof. (Dr.) V.R. Naik.
The Mechanical Engineering Department, in association with the Mechanical Engineering Students Association (MESA), organized an expert session on “Entrepreneurship Development” on Friday 15th September 2023 on account of Engineers Day for the students of Mechanical Engineering. The session was conducted by Mr. Ikhalas Patel, Director of Adroit Engineers, Shiroli. The important aspects of entrepreneurship were elaborated during the session. Also, various thrust areas in the manufacturing sector with skills requirements for entrepreneurship development were shared with students. The outcomes of the session will be helpful for students to start a business. The session was coordinated by Prof. (Dr.) B.B. Kabnure under the direction of Prof. (Dr.) V.R. Naik.
“Paper Presentation” @ Mastermind 2K23
DKTE’s Mechanical Engineering Students Association (MESA) organized Mastermind 2K23. This event comprised a Technical Paper presentation. The events got a huge response from the students. More than 45 students actively participated in this event. The theme for the paper presentation was ‘Solution for Sustainability and Development. More than 10 teams actively participated in this event. Prof. S.R. Patil, Prof. R.D. Patil, and Prof. R.R. Kolhapure were the judges for the event.Prof. (Dr.) B.B. Kabnure coordinated the event under the guidance of Prof. (Dr.) V.R. Naik.
International Youth skillday
On 15thJuly 2016, Mechanical department of textile and engineering Institute, Ichalkaranji organized a workshop on Youth skill day. During the workshop students were taught skills such as how to tie a tie knot, team working and time management. Prof. S.A. Soundattikar delivered lecture on team work, Prof. Dr. V.R. Naik and Prof. D.A. Chougale addressed on time management and Prof. Rathod impart training on tie knot. The response of students wasoverwhelming.
Mechanical Engineering Students Association – MESA organized Teachers Day & Engineers Day on 26thSept. 2016 in Mechanical Engineering Dept. In the same event, Fresher’s Welcome function was also organized. The Chief Guest for the program was Mr.Ikhlas Patel, Director, Adroit Engineers Kolhapur, who happens to be Senior Alumnus. The program started by worshiping Dr. SarvapalliRadhakrishnan and Dr. M. Visveswaraya photo. On this occasion, students honored the professors in the department by offering flowers. They also expressed their gratitude towards the teachers and also felicitated the class toppers. Mr. Patel shared his experiences and role of alumni for development of department and institute. At the event HOD, Dr. V.R. Naik addressed students and offered best wishes. The program was coordinated by MESA student coordinators and Prof. D.A.Chougale.
DKTE-ISHRAE Student Chapter:
The DKTE-ISHRAE (Textile & Engineering Institute, Ichalkaranji and Indian Society of Heating, Refrigerating and Air Conditioning Engineers) Student Chapter was inaugurated on Monday, 03rd October, 2016 at Mechanical Engineering Department of the Institute. Mr. Bhingarde, President, ISHRAE Kolhapur-Sangli Sub Chapter discussed the significance and benefits of the chapter to the students. He also guided the students from the view point of job opportunity through the ISHRAE activity‘JobJunction’in the field of Refrigeration and Air Conditioning. Expert lecture was delivered by Mr. Sanjay Ranade. The Charter Certificate was handed over to the office bearers of DKTE-ISHRAE chapter. The office bearers of the chapter are: Mr. DnyaneshwarJadhav (President), Mr. Shubham Bodhale (Vice President), Mr. Rahul Hukkeri (Treasurer) & Mr. SuhasJadhav (Secretary). The activity was co-ordinated by Prof. A. D. Patil.
Second times DKTE stood second in Konnect a soft skills programme by Learning Matters Private Limited
Konnect, a soft skills programme by Learning Matters Private Limited (LMPL), a training partner of the Ready Engineer Program by Tata Technologies Limited for Mechanical Engineering students. LMPL organized Konnect 30 days challenge to all students. It was all about motivating students to just complete all modules and acquire knowledge through different modules, which include Professional development, Personal development, Career building, Proficiency in communication, Mastery in communication and various Project management tools. Konnect 30 days challenge was started on 1st March 2023 and ended on 30th March 2023. Total 33 colleges from different universities participated in this challenge. DKTEs Textile and Engineering Institute, Ichalkaranji secured 2nd rank amongst these 33 colleges. This was coordinated by Prof. R.R. Kolhapure, Prof. G.C. Mekalke, Prof. B.B. Kabnure and Prof. A.V. Sutar & HOD Mechanical Dr. V. R. Naik.
Advanced Automobile Engineering
Mr. Junaid Momin, a student from the Mechanical Engineering Department, stood first in the Ready Engineer Advanced Automobile Design (RE 2) exam among 1942 students from 33 different colleges.
Mechanical Engineering Department - Silver Jubilee Celebration(1992 - 2017)
The Department of Mechanical Engineering has been the spirit of this Premier Institution. This Department is the Alma mater of several Technocrats and Researchers in India and Abroad. The Silver Jubilee celebrations were started on 28th July, 2017 with the inaugural function at the auspicious hands of Hon’bleShri.K.B.Awade, Chairman of DKTES..Dignitaries who were present on this occasion includes, Shri. Prakash Awade, Vice-Chairman , Dr. Sou. S. U. AwadeHon.Secretary, Mr. R.V. Ketkar Treasurer, Trustees Mr.AshokSoundattikar, Mr. S.D.Patil and Adv.S.M.Kulkarni. Dr.P.V.Kadole Director of D.K.T.E, Dr.V.R.Naik H.O.D. Mechanical Department, all Teaching and Supporting Faculties and Students were present for this Ceremony.
Many events have been planned to celebrate Silver Jubilee of the department.
Engineers’ Day Celebration & Silver Jubilee Monument was inauguration
On this auspicious occasion of Engineers’ Day, a Silver Jubilee Monument was inaugurated at the hands of Mr. Muller, Senior Expert Services, Germany and Director of our Institute Dr. P.V. Kadole. As a part of Silver Jubilee of Department of Mechanical Engineering, a Monument contest was organized in the department. Overwhelming response to this context was received from students. The best monument design was selected for installation.
“Silver Jubilee Celebration Mechanical Monument Competition”
As a part of Silver Jubilee of Department of Mechanical Engineering, a Mechanical Monument Designing Competition was organized in the Department. Overwhelming response to this competition was received from students. The designs for monument were evaluated based on concept, creativity and practical relevance. The First Prize was bagged by S.Y B.Tech. Mechanical students namely, Mr. ShubhamBanne, Mr.SarangLokhande&Mr.SwapnilSangar. •Second Prize Winner students were Miss ShrutiPardeshi, Miss Aishwarya Mahajan & Miss RevatiTodkar, from S.Y.B.Tech Mechanical. •Third Prize Winners were from T.E. Mechanical namely Mr.ShubhamPatil, Mr.NishantSangave, Mr.TirthrajPatil& Mr. SushantPatil. The first winner monument design was selected for installation. This competition was coordinated by Prof. U.S.Bongarde and Prof. R.D,Patil under the guidance of Head of the Mechanical Department Prof. (Dr.) V. R. Naik.
Engineers’ Day was celebrated in the Department of Mechanical Engineering on 15th Sept 2017. As a tradition, photo of Vishweshwaraya was worshiped at the hands of Alumnus Mr. TusharSultanpure. During his interaction with students, he elaborated the skills needed for the engineering graduates, for having better employability. He also motivated students for Entrepreneurship.
The National Level ‘Go-Kart’ Contest is scheduled in the month of October 2017 at Bhopal. Two teams of Mechanical Engineering Department. namely DKTE DRIFTERS and EAGLE ACE are participating in this event. These two teams have designed two Carts, eventually to be participated at GO CART contest @ Bhopal. These cards were worshiped and inaugurated at the hands of Mr. Muller, Senior Expert Services, Germany. Mr. Muller appreciated the efforts taken by the students for such contest.
TECH-QUIZ, Technical Event conducted by Mechanical Department
As a part of Silver Jubilee Celebrations, Mechanical Engineering Department (Student Chapter of ‘The Institution of Engineers (India)’ - SE/416115/TEI/MC), organized an event entitled “Tech-Quiz” held on 27th January 2018. This event consisted of three stages, namely Gear up, Quick Buzzer and Rapid Fire round. Total 22 students participated in this event. In first round 50 MCQ type questions were given to the participants that were required to be solved within 45 minutes. The questions were based on S.Y. B.Tech First semester subjects. For the second and third round technical questions were asked for the participants and they were require answering correctly, and based on the answers given by participants evaluation was done by judges. Top three scorer participants were declared as winner for this event. The objective of this event was to improve technical knowledge and self evaluation of students. This event was successfully co – ordinated by Prof. M. R. Rawal, , Prof R. R. Kolhapure, Prof.R. Balwan, Prof. B. B. Kabnure and Prof R. D. Patil. The event was judged by Prof. Dr. V. D. Shinde and Prof. V. A. Kamble from Mechanical Engineering Department. The winners of this event are, 1. NetrajSurnis (Winner), 2. Swapnil Mali (First Runner up), 3. SohelMujawar(Second Runner up)
Year 2022-23 | Click here to download |
Year 2021-22 | Click here to download |
Year 2020-21 | Click here to download |
Year 2019-20 | Click here to download |
Academic Year 2022-23 |
Term II (Even Semester) |
ACEDEMIC YEAR | DOWNLOAD |
First year | Click here |
Second Year | Click here |
Third Year | Click here |
Final Year | Click here |
CONTENT | DOWNLOAD |
Structure and Syllabus | Click here |
Allotted Student List 2020-2021 | Click here |
CONTENT | DOWNLOAD |
Product Design and Development | Click here |
Industrial Automation | Click here |
Engergy Engineering | Click here |
Automation and Robotics | Click here |
DEPARTMENT OF MECHANICAL ENGINEERING
BOARD OF STUDIES MEMBERS
Sr. No. |
Number of Members |
Category |
Name |
Designation |
1. |
1 Member |
Head of the Department |
Prof. (Dr.) V R Naik |
Chairman |
2. |
3 Members |
Entire faculty of each specialization |
1.Dr. V D Shinde 2.Prof. P N Gore 3.Prof. V A Kamble |
Member |
3. |
1 Members |
Academic Council nominees |
Dr. Raju S. Pawade, |
Member |
4. |
1 Member |
Vice-Chancellor Nominee |
Dr. Anil R. Acharya Associate Professor, Mechanical Engg., Govt. College of Engg., Karad, Dist. Satara, This email address is being protected from spambots. You need JavaScript enabled to view it. 9371111964 |
Member |
5. |
1 Member |
Industry/Corporate sector/allied area relating to placement |
Mr. Sachin Chougule, |
Member |
6. |
1 Member |
Meritorious alumnus –Principal nominee |
Dr. Anant Kumar Gujar, Professor, AMGOI, Wathar This email address is being protected from spambots. You need JavaScript enabled to view it. 8412834040, 9822621040 |
Member |
7 |
1 Member |
Other faculty from outside institute |
Dr. Jayant Kittur Dean,G.I.T.Belgavi This email address is being protected from spambots. You need JavaScript enabled to view it., 9449735400 |
Member |
8 |
1 Member |
Meritorious student from current academic |
Final Year Student (Topper) |
Member |
Academic Year 2023-24
Name of Faculty |
Title of the Paper |
Journal/Conference with date |
Dr. V.P. Gaikwad | Joining of Inconel-625 by microwave hybrid heating and its performance analysis | IOP Journal of Physics : Conference Series (JPCS) 10.1088/issn.1742-6596 |
R.D. Patil | Grey Relational Analysis of Specimen Dimensions in Torsion Testing | Journal of Xidian Uni. Vol. 17, Oct. 2023 |
Academic Year 2022-23
Name of Faculty |
Title of the Paper |
Journal/Conference with date |
Dr. V.R. Naik Dr. S.A. Soundattikar |
Cyber Physical system implementation for material handling in SMES | Journal of Northeastern University 25, 04, 2022 |
Dr. V.R. Naik | TQM based product development for component handling | Neuro Quantology
20/12, Oct 2022 |
Dr. V.D. Shinde Dr. B.B. Kabnure |
Evolution of microstructure and hardness in shell moduled impeller casting | Advances in Materials & Processing Technologies 8, 4, 2022 |
Dr. V.D. Shinde | Analyzing the Effect of Inoculant Addition on the Solidification of Ductile Cast Irons Using Thermal Analysis |
World Journal of Engineering 12/21/2022 |
S. G. Kanitkar | Contribution of textiles in freedom fight of Bharat | Textile Trends, Vol. L. No.8 Aug 2022 |
Dr. A.D. Patil | Compability of Petrol-Ethanol, mixtures with various proportions, in FI spark ignition engine | Journal of Xidian University Vol. 17 Issues 5 23/05/2023 |
Dr. B. B. Kabnure | Evolution of microstructure and hardness in shell moulded impeller casting | JMMDM, Vol 4 Issue-3, Sept-Dec, 2022 |
R.D. Patil Dr. B. B. Kabnure |
Design and Dev. of Portable Circular Profile Bending Machine | JMMDM, Vol 4 Issue-3, Sept-Dec, 2022 |
R.R. Kolhapure | Study of Machining Characteristics of Non-conventional Methods | ICAMIDA Vol. 105 05/01/2023 |
G C Mekalke | Investigating & Study of Various Composite Materials & their Counter parts to Replace the Conventional Materials | ICAMIDA Vol. 105 05/01/2023 |
S. B. Rayjadhav | A Novel Method of CT Chest Image Segmentation and Analysis for Early Lung Cancer Detection |
Journal of The Institution of Engineers (India) (B) 103, 1875-1883 (2022) |
S. B. Rayjadhav | Development of Polyamide Based Blend & their Nano composites – A Review | ICAMIDA Vol. 105 05/01/2023 |
Academic Year 2021-22
Name of Faculty |
Title of the Paper |
Journal/Conference with date |
Dr. V.R. Naik Dr. V.P. Gaikwad |
Development of an Autonomous Robotic System for Hospitality | G I S Science Journal, 8 Oct. 2021 |
Dr. V.R. Naik | Modeling of broaching machine: Case study | I J R E S Vol. 9 Issue 11 |
Dr. V.D. Shinde | Optimization of Mechanical Characteristics of Coir/Jute Fibers Reinforced Epoxy Composites |
GIS Science Journal |
Dr. V.D. Shinde, S.B. Rayjadhav |
Characterization of SG Iron by Ultrasonic Techniques | J. Inst. Eng. India Ser. D, 103, June 2022 |
P.N. Gore | Computer Integrated Mfg In Die Mfg Industry For Productivity & Quality Enhancement | IRJET, 09, 01,Jan 2022 |
Dr. A.D. Patil | Electrostatic Precipitator for CI Engines | International journal of Xidian University, 15, 9, (2021) |
Dr. V. P. Gaikwad Dr. A. R. Balwan |
Performance Analysis of Micro channel Heat Sink with Flow Disrupting Pins | Journal of thermal engineering, 8, 3, May 2022 |
Dr. A. R. Balwan, Dr V D Shinde |
Manufacturability assessment of custom knee implant prototype | J. Inst. Eng. India Ser. C, 103, 04, April 22 |
Dr. S.A. Soundattikar | Automated Shape & Color Based Component Sorting Using Image Processing in Mechanical Industries |
GIS Science Journal Vol. 8/12, Dec 21 |
Dr. S. A. Soundattikar | Component Handling Automated Guided Vehicle - A Cyber Physical System Case Study | IEEE Xplore Digital Library, Special Issue July 2022 |
A.V. Sutar | Overview of Manually Operated Paddy Trans planter | JUUST Journal Vol 23, Issue 12 Dec 2021 |
R.D. Patil G.C. Mekalke |
Design and Fabrication of human powered forklift | Journal of Advancement in Machines 6, 3, 2021 |
S.B. Rayjadhav | Processing of Moulding Sand Reclamation Systems and Environmental Issues | J. Inst. Eng. India Ser. D 102, Sept 2021 |
S.B. Rayjadhav U.A. Patil |
Effect of Automation on the Heating of Waste Sand in Reclamation Process Using Arduino Microcontroller | J. Inst. Eng. India Ser. D 1 Nov 2021 |
Name of Faculty |
Title of the Paper |
Journal/Conference with date |
Dr. V.R. Naik |
Development in Performance of Impeller used in Centrifugal Pump by using CFD |
International Journal of Innovation in Engg and Technology (IJIET) |
Dr. V.R. Naik |
Characterization of developed Al 6061-SiC metal matrix composite produced by stir casting method. |
Journal of Innovative research in science and Engineering, ISSN: 2454- 9665 |
Dr. V.R. Naik |
Develop. of Al 6061-SiC composite & its use in mfg. of dovetail by single response optima.of hardness & surface roughness by Taguchi method in stir casting |
Journal of Innovative research in science and Engineering, ISSN: 2449- 6010 |
G.C. Mekalke, B.B. Kabnure |
Design and Dev. of test setup to study the basic procedure of vibration analysis |
International Journal of Computer Engineering In Research Trends ISSN (O): 2349-7084 |
V.B. Magdum |
“Investigate the effect of approaching angle on cutting force during EN 8 steel turning” |
International Journal of Computer Engineering in Research Trends, ISSN: 2349-2784, |
G.C. Mekalke, R.R. Kolhapure, |
“Analytical and Parametric Optimization of Force Transmissibility by Taguchi Method for Double Stage Engine Mountings”, |
International Journal of Computer Engineering In Research Trends, ISSN (O): 2349-7084,. |
M.R. Rawal, R.R. Kolhapure, S.S. Sutar and V.D. Shinde, |
“Optimization of Resistance Spot Welding of 304 Steel Using GRA”, |
International Journal of Computer Engineering In Research Trends, , ISSN (O): 2349-7084. |
Prof.R.D.Patil , Prof.P.N.Gore , Prof.PA.Naik , Prof.U.S.Bongarde. |
"Optimization of Hollow Specimen Dimensions in Torsion Testing of AISI 1020 Steel using Grey Relational Analysis", |
International Journal for Scientific Research & Developmen, ISSN (O): 2321-0613. |
D.M.Kalai V.A.Kamble A.M.Rathod B.K.Khot |
Parametric Optimization of Rectangular Beam Type Load Cell Using Taguchi Method |
International Journal of Computer Engineering In Research Trends(IJCERT) |
D.M. Kalai |
Synthesis of Planer Eight Bar Mechanism for Function and Path Generation |
Global Research and Development Journal for Engineering (GRDJE) |
RakeshKolhapure, VasudevShinde, Vijay Kamble |
Geometrical optimization of strain gauge force transducer using GRA method |
Science Direct, Measurement, Volume 101, 2017 ISSN 0263-2241 pp. 111-117. |
P.S.Badkar, D.M.Kalai |
Design, Manufacturing and Analysis of Alloy Steel Brake Disc |
Asian Review of Mechanical Engineering Vol. 6 No. 1, 2017 ISSN: 2249 - 6289, , pp.31-37 |
D.M. Kalai P.A.Naik |
Mechanical Design of Extended Chassis Frame for Defence Vehicle |
Asian Review of Mechanical Engineering Vol. 5 No. 2, ISSN: 2231-6108 2016, pp. 1- 10 |
V.B.Magdum Dr.V.R.Naik |
“Investigating Feed Rate Effect on Cutting Force of EN 8 Turning”, |
Asian Review of Mechanical Engineering, Vol. 6 No. 1, 2017, ISSN: 2249 –6289 , PP.8-12. |
V.B.Magdum Dr.V.R.Naik |
“Study of effect of tool geometry on cutting force generated during turning”, in |
International Journal for Scientific Research and Development (IJSRD), Vol. 4, Issue 12, February 2017, ISSN (Online): 2321 0613, PP 892-895. |
Prof.Rajkumar D. Patiland ,Prof.PurushottamN.Gore |
Analysis of Specimen Dimensions in Torsion Testing of AISI 1020 Steel using Single Objective Taguchi Method and Multi Objective Grey Relational Analysis”, |
Asian Review of Mechanical Engineering Vol. 6 No. 1, 2017 ISSN: 2249 - 6289, pp.3-7. |
Prof. Rajkumar.D.Patil, Dothre Dinesh, Hegade Sachin, Urane Vivekand, Killedar Vishal |
“Design of Milling Fixture in Mass Production of Pivot Block”, |
Asian Review of Mechanical Engineering, Vol. 6 No. 1, 2017ISSN: 2249 - 6289, pp.13-17. |
Prof. Bahubali B. Kabnure and Prof. Rajkumar.D.Patil, |
“Effect of Inclination on Efficiency of Heat Pipe” |
,Asian Review of Mechanical Engineering, Vol. 6 No. 1, 2017 ISSN: 2249 – 6289, , pp.38-42. |
Suraj Yadav, Sanket Benade, Sushil Angchekar, Vaibhav Dhokle, Prof. Rakesh Kolhapure |
DESIGN AND ANALYSIS OF KNUCKLE JOINT BY USING FEA" |
International journal of current engineering and scientific research (ijcesr), vol.4, issue 6, Issn no. 2393-8374, pp.70-77 |
S. A. Soundattikar, SnehaGadkari, Amit Patil, SushilKhade |
Case Study on Process Automation using PLC in soft drink manufacturing |
International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE) Vol 2, Issue 2, February 2017 ,ISSN (Online) 2456-1290 pp 93-97 |
S. A. Soundattikar, Deepak Salunkhe |
Design and development of automated capsicum sorting system using PLC |
Journal of Advances in Science and Technology , Vol.XIII, Issue – 1, March 2017 ISSN: 2230-9659 pp19-22 |
S. A. Soundattikar, Shubham Mane, Pranav Anuje |
Case study on PLC operated Automatic Handling Systems in Mechanical Industry |
International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE) Vol 2, Issue 2, February 2017 ,ISSN (Online) 2456-1290 Pp 89-92 |
S. A. Soundattikar, Harsh Vernekar, NamrataMone, Rohan Patil |
Case study on Micro Drill Hole Inspection using PLC |
International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE), Vol 2, Issue 2, February 2017 ISSN (Online) 2456-1290 pp46-49 |
Dr.V.R.Naik |
Review on Manufacturing and analysis of composite lever clutch for Two wheeler |
International journal for innovative Research in Science and Technology (IJIRST ) Vol.3 Issue 10 , march 2017 ISSN 2349-6010 pp 289-293 |
Dr.V.R.Naik |
Use of composite material for replacement to Aluminum In conventional two wheeler Lever clutch. |
International journal for innovative Research in Science and Technology (IJIRST ) Vol.3 Issue 10 , march 2017 ISSN 2349-6010 pp 293-296 |
Dr.V.R.Naik |
Development of performance of impeller used in centrifugal pump by using computational fluid Dynamics (CFD) |
International Journal of innovations in Engineering and Technology (IJIET) vol.7 Issue 3 , oct 2016 ISSN 2314-1058 pp 114-120 |
Dr.V.R.Naik |
Comparative Numerical Static Analysis of centrifugal pump impeller design for water holding applications of medium Capacity |
International journal for specific research and Development vol.4 Issue 07,2016 ISSN-2321-0613 pp 1029-1032 |
Dr.V.R.Naik |
Analysis and optimization of speed feed and no of teeth of circular saw for special purpose sawing machine |
International journal for innovative Research in Science , Engineering and Technology (IJIRSET ) Vol.5 Issue 9 , ISSN 2347-6710 pp 16099-16108 |
Dr.V.R.Naik |
Design & Development of Special Purpose Machine for its Cycle Time Optimization |
Imperial Journal of Interdisciplinary Research (IJIR) Vol-2, Issue-9, 2016 ISSN: 2454-1362, pp 1654-1663 |
Dr.V.R.Naik |
Design & Development of Auto gauging Machine for outer ring of Needle Bearing |
International Journal of Interdisciplinary (IJIR) Research vol.2, Issue 9 , ISSN 2454:1362 pp 1667-1675 |
Dr.V.R.Naik |
Development Of Automation Based Electronic gauging system using Mechatronic devices |
International journal of innovative Research in Science engineering & technology (IJIRSET) Vol.1 Issue 9 , Issn2319-8753 pp 16073-16087 |
Kishor K. Powar |
Automatic Bar Feeding By Linear Indexing on Cutting Machine |
IJSRD - International Journal for Scientific Research & Development| Vol. 5, Issue 02, 2017 | ISSN (online): 2321-0613 |
Dr. Shinde V.D. Akiwate S. B. |
Development of Honeycomb Sandwich Structure for Aeronautical Flooring Components |
1st National conference on Mechanical Engineering in Next decade, Karad,2017, pp 165-170 |
Dr. Shinde V.D. Akiwate S. B |
Experimental Investigation of Bending behavior of Aluminium Alloy Honeycomb SandwichStructure using Four Point Bending Tests |
International Journal for Innovative Research in Science & Technology, 4 (1), , ISSN (online): 2349-6010 pp 97-101 |
Dr. Shinde V.D. S. A. Patil |
“Design, Development and Analysis of Impeller for Sand Slurry Pumping” |
International Journal of Innovative Research in Science & Technology, 4(2),ISSN (online)2349-6010 pp 112-117. |
Dr. Shinde V.D. S. A. Patil |
Testing of Two Different Enclosed Impellers at Same Speed” |
International Journal of Innovative Research in Science, Engineering and Technology. Vol.6 (7), ISSn 2347-6710 13244-13248 |
Dr. Shinde V.D. M.S.Akiwate |
Comparative analysis of photoelastic technique using ansys” |
2ndNational Conference on Recent Trends in Mechanical Engineering (NCRTME - 2017),WCE, Sangli. |
P.S. Barge, Dr. V.D.Shinde, |
Vibration analysis of bearings in centrifugal pump |
2ndNational Conference on Recent Trends in Mechanical Engineering (NCRTME - 2017),WCE, Sangli. |
2016-17
2017-18
Name of Faculty |
Title of the Paper |
Journal/Conference with date |
Dr.V.R.Naik |
Validation in the improvement of performance centrifugal pumps Using CFD
|
International research journal of Engineering & Technology ISSN: 2395-0072, Vol.4, issue 6 June 2017 |
Dr.V.R.Naik |
Investigating feed rate effect on cutting force of EN8 turning
|
Asian Review of Mechanical Engineering , ISSN: 2249-5289 Vol 6 , No.1 , 2017, p.p 8-12 |
Dr.V.D.Shinde |
“Development of Honeycomb Sandwich Structure for Aeronautical Flooring Components”,
|
1 st National conference on Mechanical Engineering in Next decade, Karad, 165-170. |
Dr.V.D.Shinde |
“Experimental Investigation of Bending behavior of Aluminium Alloy Honeycomb Sandwich Structure using Four Point Bending Tests”
|
International Journal for Innovative Research in Science & Technology, 4 (1),97-101, ISSN (online): 2349-6010 |
Dr.V.D.Shinde |
“Design, Development and Analysis of Impeller for Sand Slurry Pumping”
|
International Journal of Innovative Research in Science & Technology, 4(2), 112-117. |
Dr.V.D.Shinde |
“Testing of Two Different Enclosed Impellers at Same Speed”
|
International Journal of Innovative Research in Science, Engineering and Technology. Vol.6 (7), 13244- 13248.DOI:10.15680/IJIRSET.2 017.0607063 |
Dr.V.D.Shinde |
“Comparative analysis of photoelastic technique using ansys”
|
2ndNational Conference on Recent Trends in Mechanical Engineering (NCRTME - 2017),WCE, Sangli |
Dr.V.D.Shinde |
“Vibration analysis of bearings in centrifugal pump” |
2ndNational Conference on Recent Trends in Mechanical Engineering (NCRTME - 2017),WCE, Sangli. |
V .P.Gaikwad
|
Fabrication and testing of silicon based micro channel heat exchanger Inspired by leaf venation pattern for electronic cooling |
International journal for precision technology.(accepted paper ) |
P.S.Badkar D.M.Kalai
|
Design, Manufacturing and Analysis of Alloy Steel Brake Disc |
Asian Review of Mechanical Engineering ISSN: 2249 - 6289 Vol. 6 No. 1, 2017, pp.31-37 |
Rajkumar D. Patil Uttam S. Bongarde Vishal R. Balwan
|
Effect of Specimen Dimensions on Yield Shear Stress in Torsion Testing of AISI 1020 Steel by using Taguchi with GRA |
IJSRD - International Journal for Scientific Research & Development| Vol. 5, Issue 09, 2017 | ISSN (online): 2321-0613 |
Rakesh Kolhapure,
|
“Analysis of Four Wheel Steer Electronic Vehicle Using FEA Method,” |
International Journal of Innovative Science and Research Technology, ISSN NO. 2456 – 2165, 2, 10, 104-111,Oct-2017. |
D.M. Kalai P.A.Naik
|
Mechanical Design of Extended Chassis Frame for Defense Vehicle |
Asian Review of Mechanical Engineering ISSN: 2231-6108 Vol. 5 No. 2, 2016, pp. 1- 10 |
Dr. V.R. Naik
|
Validation in the improvement of performance centrifugal pumps Using CFD |
Int. Research Journal Of Engineering & Technology |
Dr. V.R. Naik
|
Investigating feed rate effect on cutting force of EN8 turning |
Asian Review of Mechanical Engineering |
Dr. V.R. Naik
|
Experimental validation of vibration characteristics of selected centrifugal pump |
Int. Research Journal Of Engineering & Technology |
Prof.V. A. Kamble, Prof.A. R. Balwan
|
Optimizing Turning Parameters of Al/Sicp Metal Matrix Composite Using Response Surface Methodology |
Int. Journal Of Science, Technology And Management |
Dr. V. D. Shinde
|
Design, Development and Analysis of Impeller for Sand Slurry Pumping |
Int. Journal for Innovative Research in Science & Technology, |
Dr. V. D. Shinde
|
Testing of Two Different Enclosed Impellers at Same Speed |
Int. Journal of Innovative Research in Science Engineering and Technology, |
Dr. V.D.Shinde
|
Experimental Investigation of bending behavior of Aluminium Alloy Honeycomb Sandwich Structure using Four Point Bending Tests |
Int. Journal for Innovative Research in Science & Technology |
Prof. V.P. Gaikwad
|
Fabrication and testing of silicon based micro channel heat exchanger Inspired by leaf venation pattern for electronic cooling |
Int. journal for precision Technology |
Prof. P.S.Badkar Prof. D.M.Kalai
|
Design, Manufacturing & Analysis of Alloy Steel Brake Disc |
Asian Review of Mechanical Engineering |
Rajkumar D. Patil UttamS.Bongarde Vishal R. Balwan
|
Effect of Specimen Dimensions on Yield Shear Stress in Torsion Testing of AISI 1020 Steel by using Taguchi with GRA |
Int. Journal for Scientific Research & Development |
Prof. R.R. Kolhapure
|
Analysis of Four Wheel Steer Electronic Vehicle Using FEA Method |
Int. Journal of Innovative Science & Research Technology |
Prof. D.M. Kalai Prof. P.A. Naik
|
Mechanical Design of Extended Chassis Frame for Defense Vehicle |
Asian Review of Mechanical Engineering |
2016-17
Name of Faculty |
Title of the Book |
Publisher |
Prof. G. C. Mekalke |
Crash Analysis of Front Bumper of SUV Using Finite Element Analysis |
Lambert Academic Publishing, Germany ISBN No: 978-3-330-07262-6 |
Prof. B. B. Kabnure and Prof. (Dr.) V.D. Shinde |
Modeling, Simulation and Process Development of Impeller Casting |
Published @ Lambert Academic Publishing, Germany ISBN No: 978-3-330-03020-6 |
Mechanical Department Details of the Patents Filed
Sr.No. |
Title |
Patent Number |
Name of the Faculty |
1 | Automated ice cream slicing and cup handling mechanism | 201821036630 |
Prof.S.A. Soundattikar Dr. V.R. Naik |
2 | Design and working of a varying force measuring device | 202021026140 |
Prof.V.A. Kamble Dr. V.D. Shinde |
3 | Smart Safety Stick To Repel Reptiles | 201821025865 |
Dr. V.R. Naik Prof. U.S. Khade Dr. S. A. Patil |
4 | Partial Perpetual Machine for Bicycle and other application | 201821000170 |
Prof. U.S. Khade Dr. V.R. Naik |
5 | Automatic food stuff packaging system | 201821018626 |
Prof. U.S. Khade Dr. V.R. Naik |
6 | Design and development of automated egg shell cracking and separating mechanism | 201821019120 |
Prof. S.A. Soundattikar Dr. V.R.Naik |
7 |
Smart Honking and Turn System Using Wireless Control Glove |
201621030787 |
Dr. V.R. Naik Prof. U.S. Khade |
8 |
Component tying machine and flower garland making machine. |
201821019120 |
Dr. V.R. Naik Prof. U.S. Khade |
9 | Component smart sand reclamation Machine | 342531-001 |
(Dr.) V. D. Shinde, Mr. Utkarsh A. Patil and Prof. (Dr.) P. V.Kadole |
10 |
Artificial Bee Hive |
320647-001 | Prof.V. P. Gaikwad, |
11 |
Chalk and Laser Pointer Holder Device within Duster Body |
333579-001 | Mr.P.S.Badkar, Mr.B.B.Kabnure, Prof (Dr.) V.R Naik and Prof. (Dr.) P.V. Kadole. |
12 | Micro channel Heat-Exchanger based Natural Flow Patterns, inspired by leaf venation, for Electronic Cooling | 390617 | Prof. V. P. Gaikwad, Dr. S.S. Mohite |
13 | Portable Backpack Stool | 107801 | Prof. M.R. Rawal, Mr. R.R. Kolhapure, Mr. U.A. Patil, Mr. L.S. Sawant |
14 |
Smart Electronic Device Holder |
364591-001 |
Dr. Vinayak Ramchandra Naik Dr Bahubali Bhupal Kabnure Dr Prahalad Sawant Badkar |
2016-17
Name of Faculty |
Workshop/Lecture Topic |
Date |
Place |
Mr. Shrikant Bidwai |
“Introduction to Finite Element Based Simulation” |
12-08- 2016 |
DKTES TEI |
Mr. Ramchandra Rao |
‘Career Opportunities in Power Plant Engineering’ |
07-11-2016 |
DKTES TEI |
Mr. Vaibhav Srivastava, |
Guided students for IES and GATE exams |
26-07-2016 |
DKTES TEI |
Prof. N.V.Deshpande |
‘Innovations in Biomedical Engineering’ |
18-01-2017 |
DKTES TEI |
2017-18
Name of Faculty |
Workshop/Lecture Topic |
Date |
Place |
Mr. Vignesh Naidu |
“Job Profiles Based on Abacus Software in Industry” |
25-09-2017 |
DKTES TEI |
1] Mayur Kalani 2] Pallavi Khot 3] Anagha Bedis |
3D-Printing |
28-09-2017 |
DKTES TEI |
Mr.Nikhil Padate |
“Entrepreneurship Development” |
26-09-2017 |
DKTES TEI |
Mr.Shrikant Bidwai |
Hyper loop Technology, |
07-02-2018 |
DKTES TEI |
2016-17: Name Name of Events Name of College/Place Prize Sanket Munot (Captain), Akshay Khade (Vice-Captain), Abhijeet Kudache (Driver), Abhijeet Hawal Onkar Magtdum Alok, Doshi Rushikesh Khade, Adarsh Bhatgunki, Virendra Kitturkar, Pankaj Khot, Koustubh Potdar, Digvijay Patil, Shubham Chikhalkar, Bhagyashri Patil, Minal Shinde, Tanmay Hatti, Umesh Desai, Prasad Mali, Arvind Patil, Omprakash Ipper National Kart Racing Championship National Kart Racing Championship 2nd prize for the Endurance test and achieved 2nd rank in final race a) AshiwiniZujar b)SheetalShingare Tech-Symposium 2K1 Poster Presentation DKTE Ichalkaranji Winner a) Sagar Patil b) GeetPandit Tech-Symposium 2K1 Jig Design DKTE Ichalkaranji Winner 2017-18 Name of the Student Name of Events Name of College Prize Mr.Shubham Banne, Mr.Sarang LokhandeMr.Swapnil Sangar Silver Jubilee of Department of Mechanical Engineering, a Mechanical Monument Designing Competition was organized in the Department DKTE Ichalkaranji 1st winner Miss Shruti Pardeshi, Miss Aishwarya Mahajan Miss Revati Todkar Silver Jubilee of Department of Mechanical Engineering, a Mechanical Monument Designing Competition was organized in the Department DKTE Ichalkaranji 2nd winner Mr.Shubham Patil, Mr.Nishant Sangave, Mr.Tirthraj Patil Mr.Sushant Patil Silver Jubilee of Department of Mechanical Engineering, a Mechanical Monument Designing Competition was organized in the Department DKTE Ichalkaranji 3rd winner Jeevan Bedage, Shubham Hagare Shubham Gurav Abhi Kadam Suyog Dongare “Team - O - Mania”. DKTE Ichalkaranji Winner Shantanu Yalrute PrathameshUrunkar Amit Sontakke Amey Potdar Rajwardhan Wangikar “Team - O - Mania”. DKTE Ichalkaranji 1st Runner up Asutosh Chhachwale Arshad Pimpare Arbaz Shaikh, Omkar Karveer Anand Karade “Team - O - Mania”. DKTE Ichalkaranji 2nd Runner up Netraj Surnis TECH-QUIZ DKTE Ichalkaranji Winner Swapnil Mali TECH-QUIZ DKTE Ichalkaranji 1st Runner up Sohel Mujawar TECH-QUIZ DKTE Ichalkaranji 2nd Runner up Sonali Jadhav “Techsymposium 2k18” Energy Carnival DKTE Ichalkaranji Winner Pranavi Bhosale Swati Ghune “Techsymposium 2k18” Energy Carnival DKTE Ichalkaranji Runner up Amit Sasane and Tirthraj Patil “Techsymposium 2k18” CadBee DKTE Ichalkaranji Runner up
Page 20 of 30